Step 1: Remove the bottle’s original cap or pump when it becomes difficult to get out the remaining product.


Step 2: Determine which parts fit your bottle. It could be the Dispensing Stand alone, or in conjunction with an Adapter. (Additional adapters of other sizes are available here [need hyperlink].)


Step 3: If using one of the Adapters, make sure the correct-size gasket is inside, then twist the Adapter onto the bottle.


Step 4: Make sure the XL gasket is inside the Dispensing Stand and twist it onto the Adapter or directly onto the bottle.


Step 5: Lightly tighten the Flip-It!® system, and press the valve tip closed before flipping the bottle. (Note: Bottles wobble when the Flip-It!® valve tip is open to help prevent leaks.)


Step 6: Flip the bottle upside down and stand it on a solid surface. Allow some time for gravity to move the product down into the Flip-It!® Dispensing Stand.


Step 7: To dispense the product, first pull open the valve tip.


Step 8: Squeeze the bottle to get out the desired amount of product, then close the valve tip and keep the bottle standing upside down on the Flip-It!®